Matt Cone January 6, 2021 TutorialsiPhoneNetwork

How To Check My Own Ip Address In Linux
How To Check Your Own Ip Address Online
Correct Ip Address

Your iPhone is assigned something called an IP address when it connects to a Wi-Fi network. Other devices that are connected to the same Wi-Fi network can use this unique identifier to transfer information to and from your iPhone. If this sounds confusing, it might help to think of an IP address as your iPhone’s home address. Just like physical mail, which is routed to your home via a unique address, digital information is routed to your iPhone using an IP address.

There may be certain situations when you’ll need to find your iPhone’s IP address. Here’s how to find your iPhone’s IP address:

From the home screen, tap Settings.
Tap Wi-Fi. The screen shown below appears.
Tap the connected Wi-Fi network. The window shown below appears.
Your iPhone’s current IP address for the selected Wi-Fi network is displayed at the top of the window, as shown above. If your iPhone is connected to an IPv6-enabled network, your iPhone is also assigned one or more IPv6 IP addresses. Tap IP Address in the IPv6 Address section to view those IP addresses.

My IP - shows your computer IP address, that is seen by web servers and network. IP address is exposed to any network service (web, FTP, etc.). If behind router / firewall, then gateway address is shown. Smart Whois - find out an owner / registrar of an IP address or IP address block using Smart Whois domain lookup service. Your computer’s IP address (Internet Protocol) is, as the name suggests, an address that provides an identity for your device on a network. Whether it’s a local network within an intranet at a. Select From The Tools Below to Keep You Safe: IP Look Up. Know the IP address of another computer? You can find where in the world it is and more.

Congratulations! You have successfully found your iPhone’s IP address.

Tip: Your iPhone is probably assigned a dynamic IP address, which is a temporary address that is unique to your internal network. These addresses commonly start with 192.168 and 10.0. Since these addresses are dynamically and randomly assigned by your router every time a device connects to a network, you shouldn’t expect your iPhone to have the same IP address every time you connect to your Wi-Fi network.

Related Articles

Subscribe to our email newsletter

Sign up and get Macinstruct's tutorials delivered to your inbox. No spam, promise!

An IP lookup, also known as an IP address lookup or IP checker, is the act of trying to detect the information behind an IP address, for both IPV4 and IPV6 types of IPs.

When you perform an IP address lookup in real time, you will likely be querying and testing against the ARIN (American Registry for Internet Numbers) database. On other occasions, the query will be answered by a passive DNS, domain or IP database server. In either situation, inputting an IP address will show you detailed information about the ISP and web hosting/server provider using that network block.

Most of the time, this sort of information is queried by technical users, system administrators and security researchers performing infosec investigations surrounding phishing domains, spamming, DNS attacks and other illegal activities.

Today we’ll explore the top most effective tools you can use to perform an IP lookup utilizing terminal-based commands and web-based interfaces.

Top Unix/Linux IP lookup tools

While an IP lookup can be performed from Windows operating systems, Unix and Linux are often the ideal platforms to run a full IP lookup and domain and network diagnostics, due to the wide number of tools available and actions you can perform.

Now let’s analyze the most popular terminal-based tools designed for performing a quick domain IP address lookup as well as a WHOIS IP lookup.

Ping

The Ping tool is a cross-platform command available on most modern operating systems. It’s widely used to determine if a network or remote machine is responding to remote network requests—in other words, if it’s “alive” (online).

The Ping command uses the ICMP echo (RFC 792 Internet Control Message Protocol) function to send packets over the network to a specific hostname or IP address. Once the packet has been sent, it will wait for the remote packet response. If the remote host is up, it will return a network packet; if not, it may be a sign that the host is unreachable, down or simply that the ICMP response is disabled by firewall rules on the destination server.

This command is also used to measure the network response speed, packet loss and number of packets sent/received. Ultimately, the main goal of Ping is to resolve the IP address of any host, as you see below:

ping domain.com

This way you can perform a simple domain IP lookup. When you target a balanced domain that is listening on multiple IP addresses (as used in Round Robin DNS, for example), the domain IP lookup will sometimes resolve to different IP addresses.

Microsoft’s DNS zone exemplifies this case:

The Ping command can also be used against IP addresses—just replace the target for any IP address, as shown below:

ping 8.8.8.8

This way, we can get a summary of all the data obtained from this quick IP network lookup:

And there you have it! That’s the easiest way to perform a domain IP lookup.

Dig

Dig, know as Domain Information Groper, is a popular domain tool and DNS utility used to query DNS name servers while performing IP and DNS lookups.

To run a simple domain IP lookup using Dig, use the following syntax:

dig A domain.com

For example:

In the previous example, dig was querying against the A DNS record type, which answered back showing the 151.139.243.5 as the main IP address.

You can see that there is a lot of information that isn’t directly related to the IP address, such as query time, the DNS server that was queried, query status, and other details.

Here’s a simplified way to achieve the same results:

+noall disables stats, comments and other non-useful things, and +answer will only include the answer from the DNS server, the very part we need.

For an even easier way to do it, use the +short option:

nslookup

nslookup is another widely-used system and network administration terminal-based tool available on Unix/Linux and Windows systems.

This tool is mostly used while running network diagnostics and system administration tasks, often to query DNS servers as a way to grab the IP address behind a host.

Let’s illustrate how to use nslookup to run a simple domain IP lookup:

How To Check My Own Ip Address In Linux

nslookup securitytrails.com

Expected output:

Host

One way to use the host command to perform an IP lookup is to query against an IP address. You can also use it bidirectionally when querying hostnames — host can help security researchers perform DNS lookups to translate hostnames into IP addresses, and vice versa. It supports different lookups for various DNS records such as A, MX or NS records.

To find the IP address of the remote securitytrails.com server, just type:

host securitytrails.com

This will return something like:

As you see, you obtained the main IP address (151.139.243.5) from the A-type DNS record, as well as the MX records from Google G-suite.

Let’s see the opposite now with the IP addresses of two [popular DNS servers][blog_dnsservers] such as Cloudflare’s 1.1.1.1 and Google’s 8.8.8.8.

In this case, we obtained the rDNS or PTR record from the IP network provider. This is also called reverse IP lookup, or rDNS lookup.

WHOIS

The WHOIS command is one of our favorite terminal commands, as it can reveal a lot of information about any IP address.

As seen in our WHOIS History article, the WHOIS command dates back to the time of ARPANET, and its development has continued to the present day.

When you use WHOIS to perform an IP lookup, your host wil

How To Check Your Own Ip Address